Equipment

Mitsubishi MVR 35

  • Travels — X204”  Y128”   ZIW74”
  • 8,000 RPM’s
  • Fanuc Series 31i Control
  • 3+2 Capable with Universal Head Attached
  • 600 IPM Cut Feed & 600 IPM Rapid Traverse
  • 40 HP

FPT – LEM 93 M5 Vertical
Machining Center

  • Mitsubishi Controller
  • 4,000 RPM Spindle
  • 600 IPM Cut Feed & 600 IPM Rapid Traverse
  • Machining Envelope: X 196” x Y 96” x Z 47”
  • 3+2 Capable with Universal Head Attached

FIDIA – GTF 22
Vertical Machining Center

  • Fidia Controller
  • 300 IPM Cut Feed & 600 IPM Rapid Traverse
  • Machining Envelope: X 106” x Y 86” x Z 40”
  • Capable of Continuous 5-Axis Machining

Lucas Horizontal Machining Center

  • Mitsubishi M70 Controller
  • 1200 RPM Spindle
  • 5” Spindle Bar
  • 250 IPM Cut Feed & 400 IPM Rapid Traverse
  • Machining Envelope: X 108” x Y 96” x Z 36” x W 70”

Giddings & Lewis Horizontal
Machining Center

  • Mitsubishi Controller
  • 800 RPM Spindle
  • 100 IPM Cut Feed & 200 IPM Rapid Traverse
  • Machining Envelope: X 168” x Y 144” x Z 60” x W 70”

Droop & Rein Horizontal
Machining Center

  • Fidia Controller
  • 1,500 RPM Spindle
  • 100 IPM Cut Feed & 200 IPM Rapid Traverse
  • Machining Envelope: X 100” x Y 58” x Z 40”

Mori-Seiki Dura 5100
Vertical Machining Center

  • Fanuc Controller
  • 10,000 RPM Spindle
  • 787 IPM Cut Feed & 1400 IPM Rapid Traverse
  • Machining Envelope: X 41” x Y 21” x Z 20”
  • 30 Pot Tool Changer

4 Fadal Vertical Machining Centers

  • Fadal Controllers
  • 10,000 RPM Spindles
  • 400 IPM Cut Feed & 700 IPM Rapid Traverse
  • Machining Envelope: X 80” x Y 30” x Z 30”
  • 21 Pot Tool Changer

Fidia K199 5 Axis Mill

  • Machining Envelope: X65” x  Y30”  x  Z33”
  • 24,000 RPM’s
  • 1181 imp Federate
  • Fidia Control

Heyligenstaedt Mill

  • Machininig Envelope: X157”  Y70”  Z51”
  • Table Size — 196”x78”
  • Fidia Control
  • 3000 RPM’s
  • 236 IPM Feedrate
  • 78,000 lb Capacity

2 Overhead Crane

  • 25 Ton Capacity
  • 10 Ton Capacity
  • Manual metalworking area
  • Small assembly welding capability

CAD/CAM Software Capabilities

  • We proudly use Mastercam and WorkNC for all of our CAM Programming.
  • Our Engineering Department Uses Mastercam, Smirt, and Unigraphics NX
  • Compatible Data Formats are: XDW, PRT, IGS, STP, STL, XT, SMZ, DWG, DXF, CATIA-V5

Installation Time Lapse of the Mitsubishi MVR 35 EX